Editors
Editor in chief
K. Ragulskis (Lithuanian Academy of Sciences, k.ragulskis@jve.lt, kazimieras3@yahoo.com)
Editorial Board
V.Babitsky (Loughborough University, UK)
N.Bachschmid (Politecnico di Milano, Italy)
R.Bansevičius (Kaunas University of Technology, Lithuania)
R.Barauskas (Kaunas University of Technology, Lithuania)
I.Blekhman (Mekhanobr - Tekhnika Corporation, Russia)
M.Bogdevičius (Vilnius Gediminas Technical University, Lithuania)
M.Brennan (University of Southampton, UK)
A.Bubulis (Kaunas University of Technology, Lithuania)
R.Daukševičius (Kaunas University of Technology, Lithuania)
Y.Davydov (Institute of Machine Building Mechanics, Russia)
M.Dimentberg (Worcester Polytechnic Institute, USA)
J.Duhovnik (University of Ljubljana, Slovenia)
A.Fedaravičius (Kaunas University of Technology, Lithuania)
R.Ganiev (Blagonravov Mechanical Engineering Research Institute, Russia)
L.Gik (Kaliningrad State Technical University, Russia)
A.Gupta (Northern Illinois University, USA)
D.Gužas (Šiauliai University, Lithuania)
R.Kasuba (Northern Illinois University, USA)
R.Kažys (Kaunas University of Technology,Lithuania)
V.Klyuev (Association Spektr - Group, Russia)
C.G. Koh (National University of Singapore, Singapore)
G.Kulvietis (Vilnius Gediminas Technical University, Lithuania)
V.Lyalin (Izhevsk State Technical University, Russia)
M.Mariūnas (Vilnius Gediminas Technical University, Lithuania)
R.Maskeliūnas (Vilnius Gediminas Technical University, Lithuania)
V.Ostaševičius (Kaunas University of Technology, Lithuania)
A.Palevičius (Kaunas University of Technology, Lithuania)
G.Panovko (Blagonravov Mechanical Engineering Research Institute, Russia)
N.Perkins (University of Michigan, USA)
A.Pesterev (Institute of Control Sciences, Russia)
M.Ragulskis (Kaunas University of Technology, Lithuania)
V.Royzman (Khmelnitskiy National University, Ukraine)
M.A. F. Sanjuan (University Rey Juan Carlos, Spain)
E.Shahmatov (Samara State Aerospace University, Russia)
J.Škliba (Technical University of Liberec, Czech Republic)
G.Tomlinson (University of Sheffield, UK)
R.Vaicaitis (Columbia University, USA)
A.-V. Valiulis (Vilnius Gediminas Technical University, Lithuania)
P.Vasiljev (Vilnius Pedagogical University, Lithuania)
J.Viba (Riga Technical University, Latvia)
V.Volkovas (Kaunas University of Technology, Lithuania)
J.Wallaschek (Leibniz University Hannover, Germany)
M.Zakrzhevsky (Riga Technical University, Latvia)
J.H. Zhang (Xi’an Jiaotong University, China)
Guide to authors
General Requirements
The authors must ensure that the paper presents an original unpublished work which is not under consideration for publication elsewhere.
The following structure of the manuscript is recommended: abstract, keywords, nomenclature,
introduction, main text, results, conclusions and references.
Manuscript should be single-spaced, one column 175 x 248 mm format, using MS Word. Margins: top 13 mm, bottom 17 mm, left 26 mm, right 13 mm, header 8 mm, footer 13 mm.
Font: Times New Roman. Title of the article 16 pt Bold, authors name 10 pt Bold, title of the institution 9 pt Normal, headings of the tables 9 pt Normal, formulas and text 10 pt Normal, indexes 5 pt Normal, all symbols Italic, vectors Bold, numbers Normal. Figures, tables and equations should fit into one column.
Heading of the table starts with table number 9 pt Bold as “Table 1.”, then further text 9 pt Normal. Table itself 9 pt Normal.
Figure caption starts with figure number 9 pt Bold as “Fig. 1.”, then further text 9 pt Normal. Figure itself must be a single graphical jpg file.
Tables and figures are placed after the paragraph in which they are first referenced.
List of references: reference number and authors 9 pt Bold, further information 9 pt Normal:
[1] Zienkiewicz O. C. The Finite Element Method in Engineering Science. Moscow: Mir, 1975.
[2] Juška V., Svilainis L., Dumbrava V. Analysis of piezomotor driver for laser beam deflection. Journal of Vibroengineering, Vol. 11, Issue 1, 2009, p. 17 – 26.
The authors are recommended to see the recent issue of the journal and prepare the manuscript in the due style. The authors are responsible for the correctness of the English language.
The authors are recommended to see the recent issue of the journal and prepare the manuscript in the due style. The authors are responsible for the correctness of the English language.
The manuscripts can be submitted to any member of the Editorial Board who will organise the review process and will give recommendations.
The authors are expected to cover partial costs of publication in JVE.
JVE annual subscription fees: 100,- EUR (individual); 200,- EUR (institutional).
JVE annual subscription fees: 200,- EUR (individual); 400,- EUR (institutional).